Cisco AIR-CAP2602I-Z-K9 Aironet 802.11n Dual Band Wireless Access Point PoE
Cisco Aironet 2602I — 802.11n Dual-Band Enterprise Access Point
The Cisco Aironet 2602I is an 802.11n dual-band indoor enterprise access point delivering up to 450 Mbps per band via 3x3 MIMO technology. PoE powered and designed for ceiling-mount deployment, it is backed by a 12-month warranty from Reboot IT for enterprise Wi-Fi installations.
Key Benefits
- Dual-Band 802.11n: Simultaneous 2.4 GHz and 5 GHz radios for maximum client flexibility and interference avoidance
- 3x3 MIMO Technology: Three spatial streams per band delivering up to 450 Mbps throughput per radio
- PoE Powered: IEEE 802.3af/at compatible — no external power adapter needed, simplifying ceiling-mount installations
- Internal Omni Antennas: Optimised radiation pattern for open-plan offices, warehouses, and indoor environments
- Cisco CleanAir: Built-in spectrum intelligence detects and mitigates Wi-Fi interference automatically
- 12-Month Warranty: Tested and reset to factory defaults by Reboot IT's Melbourne-based technicians
Performance in Use
The Cisco Aironet 2602I is purpose-built for enterprise Wi-Fi deployments where reliability and manageability are priorities. Operating under a Cisco Wireless LAN Controller (WLC) in lightweight mode, or independently in autonomous mode, the 2602I handles dense client environments — open-plan offices, meeting rooms, and warehouses — with consistent dual-band performance across a large coverage area.
Cisco CleanAir technology continuously monitors the RF environment, identifying interference sources such as Bluetooth devices, microwave ovens, and rogue radios. When interference is detected, the access point dynamically adjusts its channel to maintain throughput — reducing the Wi-Fi reliability issues that commonly arise in busy office environments.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | Cisco Aironet 2602I (AIR-CAP2602I) |
| Wi-Fi Standard | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz + 5 GHz (dual-band simultaneous) |
| MIMO Configuration | 3x3 with 3 spatial streams |
| Max Throughput | Up to 450 Mbps per band |
| Antennas | Internal omni-directional |
| Power | PoE — IEEE 802.3af/at |
| Ethernet Uplink | 1x Gigabit Ethernet |
| Mounting | Ceiling or wall (indoor) |
| Controller Support | Cisco WLC (lightweight) or autonomous mode |
| Warranty | 12-month (Reboot IT) |
Is It Right for You?
| Best For ✓ | Not For ✗ |
|---|---|
| Enterprise Wi-Fi expansion or replacement projects | Outdoor or weatherproof access point deployments |
| Cisco WLC-managed wireless infrastructure | Environments requiring Wi-Fi 5 (802.11ac) or Wi-Fi 6 |
| Dense indoor office and warehouse coverage | Home or SOHO use cases |
| PoE switch-powered ceiling installations | Sites without PoE switch infrastructure |
| Dual-band coverage with CleanAir interference mitigation | High-density 802.11ax (Wi-Fi 6) deployments |
Condition Grades
| Grade | Description |
|---|---|
| A — Excellent | Minimal cosmetic marks. All ports functional. Tested and reset to factory defaults. All LEDs verified. |
| B — Good | Light wear or minor marks. All ports functional. Tested and reset to factory defaults. |
Frequently Asked Questions
Does the Aironet 2602I need a Cisco controller?
It can operate in lightweight mode (requires a Cisco WLC) or autonomous mode (standalone, no controller). The operating mode depends on the firmware loaded — contact us if you need clarification on the unit's current mode.
What PoE standard does it use?
The 2602I supports IEEE 802.3af (15.4W) and 802.3at (30W) PoE. A PoE-capable switch or injector is required — no power adapter is included.
What Wi-Fi standards does it support?
The 2602I supports 802.11a, 802.11b, 802.11g, and 802.11n — operating simultaneously on 2.4 GHz and 5 GHz.
Can it operate without a controller?
Yes, in autonomous mode with a Cisco IOS image. Contact us for assistance if you need the firmware verified or changed before deployment.
Does mounting hardware come with the unit?
Mounting brackets and ceiling rails may or may not be included depending on stock — please check the listing or contact us to confirm.
How is shipping handled?
Shipping costs apply based on size and destination — rates are calculated at checkout.
What does the 12-month warranty cover?
All hardware defects and functional failures. Units are tested and reset to factory defaults before dispatch.
12-Month Warranty — Reboot IT
Every Cisco Aironet 2602I sold by Reboot IT is backed by a 12-month return-to-base warranty. Our team has been testing, grading, and reselling quality IT equipment since 2001 from our Melbourne base. Shipping costs apply based on size and destination — rates are calculated at checkout. Questions? Visit us at reboot-it.com.au.
Cisco Aironet 2602I — 802.11n Dual-Band Enterprise Access Point
The Cisco Aironet 2602I is an 802.11n dual-band indoor enterprise access point delivering up to 450 Mbps per band via 3x3 MIMO technology. PoE powered and designed for ceiling-mount deployment, it is backed by a 12-month warranty from Reboot IT for enterprise Wi-Fi installations.
Key Benefits
- Dual-Band 802.11n: Simultaneous 2.4 GHz and 5 GHz radios for maximum client flexibility and interference avoidance
- 3x3 MIMO Technology: Three spatial streams per band delivering up to 450 Mbps throughput per radio
- PoE Powered: IEEE 802.3af/at compatible — no external power adapter needed, simplifying ceiling-mount installations
- Internal Omni Antennas: Optimised radiation pattern for open-plan offices, warehouses, and indoor environments
- Cisco CleanAir: Built-in spectrum intelligence detects and mitigates Wi-Fi interference automatically
- 12-Month Warranty: Tested and reset to factory defaults by Reboot IT's Melbourne-based technicians
Performance in Use
The Cisco Aironet 2602I is purpose-built for enterprise Wi-Fi deployments where reliability and manageability are priorities. Operating under a Cisco Wireless LAN Controller (WLC) in lightweight mode, or independently in autonomous mode, the 2602I handles dense client environments — open-plan offices, meeting rooms, and warehouses — with consistent dual-band performance across a large coverage area.
Cisco CleanAir technology continuously monitors the RF environment, identifying interference sources such as Bluetooth devices, microwave ovens, and rogue radios. When interference is detected, the access point dynamically adjusts its channel to maintain throughput — reducing the Wi-Fi reliability issues that commonly arise in busy office environments.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | Cisco Aironet 2602I (AIR-CAP2602I) |
| Wi-Fi Standard | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz + 5 GHz (dual-band simultaneous) |
| MIMO Configuration | 3x3 with 3 spatial streams |
| Max Throughput | Up to 450 Mbps per band |
| Antennas | Internal omni-directional |
| Power | PoE — IEEE 802.3af/at |
| Ethernet Uplink | 1x Gigabit Ethernet |
| Mounting | Ceiling or wall (indoor) |
| Controller Support | Cisco WLC (lightweight) or autonomous mode |
| Warranty | 12-month (Reboot IT) |
Is It Right for You?
| Best For ✓ | Not For ✗ |
|---|---|
| Enterprise Wi-Fi expansion or replacement projects | Outdoor or weatherproof access point deployments |
| Cisco WLC-managed wireless infrastructure | Environments requiring Wi-Fi 5 (802.11ac) or Wi-Fi 6 |
| Dense indoor office and warehouse coverage | Home or SOHO use cases |
| PoE switch-powered ceiling installations | Sites without PoE switch infrastructure |
| Dual-band coverage with CleanAir interference mitigation | High-density 802.11ax (Wi-Fi 6) deployments |
Condition Grades
| Grade | Description |
|---|---|
| A — Excellent | Minimal cosmetic marks. All ports functional. Tested and reset to factory defaults. All LEDs verified. |
| B — Good | Light wear or minor marks. All ports functional. Tested and reset to factory defaults. |
Frequently Asked Questions
Does the Aironet 2602I need a Cisco controller?
It can operate in lightweight mode (requires a Cisco WLC) or autonomous mode (standalone, no controller). The operating mode depends on the firmware loaded — contact us if you need clarification on the unit's current mode.
What PoE standard does it use?
The 2602I supports IEEE 802.3af (15.4W) and 802.3at (30W) PoE. A PoE-capable switch or injector is required — no power adapter is included.
What Wi-Fi standards does it support?
The 2602I supports 802.11a, 802.11b, 802.11g, and 802.11n — operating simultaneously on 2.4 GHz and 5 GHz.
Can it operate without a controller?
Yes, in autonomous mode with a Cisco IOS image. Contact us for assistance if you need the firmware verified or changed before deployment.
Does mounting hardware come with the unit?
Mounting brackets and ceiling rails may or may not be included depending on stock — please check the listing or contact us to confirm.
How is shipping handled?
Shipping costs apply based on size and destination — rates are calculated at checkout.
What does the 12-month warranty cover?
All hardware defects and functional failures. Units are tested and reset to factory defaults before dispatch.
12-Month Warranty — Reboot IT
Every Cisco Aironet 2602I sold by Reboot IT is backed by a 12-month return-to-base warranty. Our team has been testing, grading, and reselling quality IT equipment since 2001 from our Melbourne base. Shipping costs apply based on size and destination — rates are calculated at checkout. Questions? Visit us at reboot-it.com.au.
Description
Cisco Aironet 2602I — 802.11n Dual-Band Enterprise Access Point
The Cisco Aironet 2602I is an 802.11n dual-band indoor enterprise access point delivering up to 450 Mbps per band via 3x3 MIMO technology. PoE powered and designed for ceiling-mount deployment, it is backed by a 12-month warranty from Reboot IT for enterprise Wi-Fi installations.
Key Benefits
- Dual-Band 802.11n: Simultaneous 2.4 GHz and 5 GHz radios for maximum client flexibility and interference avoidance
- 3x3 MIMO Technology: Three spatial streams per band delivering up to 450 Mbps throughput per radio
- PoE Powered: IEEE 802.3af/at compatible — no external power adapter needed, simplifying ceiling-mount installations
- Internal Omni Antennas: Optimised radiation pattern for open-plan offices, warehouses, and indoor environments
- Cisco CleanAir: Built-in spectrum intelligence detects and mitigates Wi-Fi interference automatically
- 12-Month Warranty: Tested and reset to factory defaults by Reboot IT's Melbourne-based technicians
Performance in Use
The Cisco Aironet 2602I is purpose-built for enterprise Wi-Fi deployments where reliability and manageability are priorities. Operating under a Cisco Wireless LAN Controller (WLC) in lightweight mode, or independently in autonomous mode, the 2602I handles dense client environments — open-plan offices, meeting rooms, and warehouses — with consistent dual-band performance across a large coverage area.
Cisco CleanAir technology continuously monitors the RF environment, identifying interference sources such as Bluetooth devices, microwave ovens, and rogue radios. When interference is detected, the access point dynamically adjusts its channel to maintain throughput — reducing the Wi-Fi reliability issues that commonly arise in busy office environments.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | Cisco Aironet 2602I (AIR-CAP2602I) |
| Wi-Fi Standard | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz + 5 GHz (dual-band simultaneous) |
| MIMO Configuration | 3x3 with 3 spatial streams |
| Max Throughput | Up to 450 Mbps per band |
| Antennas | Internal omni-directional |
| Power | PoE — IEEE 802.3af/at |
| Ethernet Uplink | 1x Gigabit Ethernet |
| Mounting | Ceiling or wall (indoor) |
| Controller Support | Cisco WLC (lightweight) or autonomous mode |
| Warranty | 12-month (Reboot IT) |
Is It Right for You?
| Best For ✓ | Not For ✗ |
|---|---|
| Enterprise Wi-Fi expansion or replacement projects | Outdoor or weatherproof access point deployments |
| Cisco WLC-managed wireless infrastructure | Environments requiring Wi-Fi 5 (802.11ac) or Wi-Fi 6 |
| Dense indoor office and warehouse coverage | Home or SOHO use cases |
| PoE switch-powered ceiling installations | Sites without PoE switch infrastructure |
| Dual-band coverage with CleanAir interference mitigation | High-density 802.11ax (Wi-Fi 6) deployments |
Condition Grades
| Grade | Description |
|---|---|
| A — Excellent | Minimal cosmetic marks. All ports functional. Tested and reset to factory defaults. All LEDs verified. |
| B — Good | Light wear or minor marks. All ports functional. Tested and reset to factory defaults. |
Frequently Asked Questions
Does the Aironet 2602I need a Cisco controller?
It can operate in lightweight mode (requires a Cisco WLC) or autonomous mode (standalone, no controller). The operating mode depends on the firmware loaded — contact us if you need clarification on the unit's current mode.
What PoE standard does it use?
The 2602I supports IEEE 802.3af (15.4W) and 802.3at (30W) PoE. A PoE-capable switch or injector is required — no power adapter is included.
What Wi-Fi standards does it support?
The 2602I supports 802.11a, 802.11b, 802.11g, and 802.11n — operating simultaneously on 2.4 GHz and 5 GHz.
Can it operate without a controller?
Yes, in autonomous mode with a Cisco IOS image. Contact us for assistance if you need the firmware verified or changed before deployment.
Does mounting hardware come with the unit?
Mounting brackets and ceiling rails may or may not be included depending on stock — please check the listing or contact us to confirm.
How is shipping handled?
Shipping costs apply based on size and destination — rates are calculated at checkout.
What does the 12-month warranty cover?
All hardware defects and functional failures. Units are tested and reset to factory defaults before dispatch.
12-Month Warranty — Reboot IT
Every Cisco Aironet 2602I sold by Reboot IT is backed by a 12-month return-to-base warranty. Our team has been testing, grading, and reselling quality IT equipment since 2001 from our Melbourne base. Shipping costs apply based on size and destination — rates are calculated at checkout. Questions? Visit us at reboot-it.com.au.
